INS／GPS组合导航系统的容错研究

本文研究了INS/GPS组合导航系统的容错问题,并提出了一个两级故障检测及分离方案。通过采用该方案,INS/GPS组合导航系统将具有较高的容错能力,并能为用户提供连续、精确的导航信息。     

联合制导攻击武器六自由度系统仿真

重点分析了GPS/IN S复合制导系统及激光导引头的工作原理和建模方法,同时介绍了增程套件的原理,并设计了方案弹道。通过六自由度弹道仿真,比较了增加组件前后联合制导攻击武器的性能指标。研究结论对我国现有库存常规炸弹的制导化改进有一定的参考价值。     

两种轴线相交度测量方法的比较

介绍了两种用准直望远镜测量三轴转台轴线相交度的测量原理和实现方法,对两种方法进行了比较,并指出了测量中应注意的问题。     

天线分析仪控制系统的研制

介绍了天线分析仪控制系统研制过程中的硬件设计关键技术,并提出了轴角转换器控制卡的设计方案,实验表明该方案具有一定的实用性与通用性。     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

直升机外挂吊运技术研究

直升机外部吊挂运送物资在国防和国民经济建设中有极为广泛的用途。本文以直8A型机和米171直升机为例，对直升机外挂吊运的飞行性能计算、全机稳定性、吊具系统的设计、飞行员和指挥员、信号员和索具员如何协调等问题进行了研究分析，为今后执行外挂吊运任务的设计和实施，提供了有价值的建议。     

无人机下滑着陆DGPS/INS导航及引导系统的仿真与试验研究

介绍了一种采用输出校正方式DGPS/INS组合导航系统引导无人机下滑着陆的方案。给出了该方案的数学模型,对组合导航系统进行了数字仿真,并在数字仿真的基础上进行了动态跑车试验,验证了所设计的输出校正方式DGPS/INS组合导航系统能够满足引导无人机自动下滑着陆的精度要求。     

基于规划航迹的“三自”光纤惯导系统航向耦合效应抑制技术

目前,国内"三自"(自标定、自对准、自检测)光纤惯导系统在长航时高精度自主导航领域已逐渐开展应用,但光纤陀螺安装误差、安装不正交度以及标度因数等参数稳定性大大限制了"三自"光纤惯导系统精度的提升,其主要原因是载体运动诱发的航向耦合效应严重影响了旋转调制效果。从航向耦合效应机理分析入手,指出了"三自"惯导系统航向耦合效应的不可解耦性,但针对无人飞行器和无人潜航器等通常需要规划航迹的载体,提出了一种基于规划航迹的旋转方案自适应调整技术,有效地抑制了航向耦合效应。试验结果表明,该方法可将系统的导航精度提升80%以上。     

A dimension reduced INS/VNS integrated navigation method for planetary rovers

Inertial navigation system/visual navigation system (INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and current state vectors (position and attitude) of planetary rovers, the performance of the Kalman filter (KF) will be challenged by the time-correlation problem. A state augmentation method, which augments the previous state value to the state vector, is commonly used when dealing with this problem. However, the augmenting of state dimensions will result in an increase in computation load. In this paper, a state dimension reduced INS/VNS integrated nav-igation method based on coordinates of feature points is presented that utilizes the information obtained through INS/VNS integrated navigation at a previous moment to overcome the time rel-evance problem and reduce the dimensions of the state vector. Equations of extended Kalman filter (EKF) are used to demonstrate the equivalence of calculated results between the proposed method and traditional state augmented methods. Results of simulation and experimentation indicate that this method has less computational load but similar accuracy when compared with traditional methods.     

Cross-sectional deformation behavior of double-ridged rectangular tube with fillers in different stages of H-typed bending

The bent double-ridged rectangular tube (DRRT) with high forming quality is helpful to improve the microwave transmission accuracy. For reducing the cross-sectional deformation in the H-typed bending process, in addition to using rigid mandrel to support the inside of tube, ridge groove fillers are also added to restrict the deformation of ridge grooves. Because of the change of stress and strain state of bent tube in bending, rigid mandrel retracting and specially twice-springback stages, and the springback of fillers, the cross-sectional deformation of tube in each stage may be different. Therefore, based on the ABAQUS platform, the finite element models (FEM) for H-typed bending, mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated. It is found that, for the height and width deformation of tube and spacing deformation of ridge grooves, retraction of mandrel can make the distribution of these deformations more uniform along the bending direction. The first springback can reduce these deformations significantly, which should be emphasized. But the second springback only increases them by less amount, which can be ignored. The smaller height deformation of ridge groove and filler can be neglected.